#! /bin/bash
# FSQA Test No. 112
#
# Test several cases of cloning inline extents that used to lead to file
# corruption or data loss.
#
#-----------------------------------------------------------------------
#
# Copyright (C) 2015 SUSE Linux Products GmbH. All Rights Reserved.
# Author: Filipe Manana <fdmanana@suse.com>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it would be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write the Free Software Foundation,
# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
#-----------------------------------------------------------------------
#

seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"
tmp=/tmp/$$
status=1	# failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15

_cleanup()
{
	cd /
	rm -f $tmp.*
}

# get standard environment, filters and checks
. ./common/rc
. ./common/filter

# real QA test starts here
_supported_fs btrfs
_supported_os Linux
_require_scratch
_require_cloner
_require_btrfs_fs_feature "no_holes"
_require_btrfs_mkfs_feature "no-holes"
_require_xfs_io_command "falloc"

rm -f $seqres.full

test_cloning_inline_extents()
{
	local mkfs_opts=$1
	local mount_opts=$2

	_scratch_mkfs $mkfs_opts >>$seqres.full 2>&1
	_scratch_mount $mount_opts

	# File bar, the source for all the following clone operations, consists
	# of a single inline extent (50 bytes).
	$XFS_IO_PROG -f -c "pwrite -S 0xbb 0 50" $SCRATCH_MNT/bar \
		| _filter_xfs_io

	# Test cloning into a file with an extent (non-inlined) where the
	# destination offset overlaps that extent. It should not be possible to
	# clone the inline extent from file bar into this file.
	$XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 16K" $SCRATCH_MNT/foo \
		| _filter_xfs_io
	$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo

	# Doing IO against any range in the first 4K of the file should work.
	# Due to a past clone ioctl bug which allowed cloning the inline extent,
	# these operations resulted in EIO errors.
	echo "File foo data after clone operation:"
	# All bytes should have the value 0xaa (clone operation failed and did
	# not modify our file).
	od -t x1 $SCRATCH_MNT/foo
	$XFS_IO_PROG -c "pwrite -S 0xcc 0 100" $SCRATCH_MNT/foo | _filter_xfs_io

	# Test cloning the inline extent against a file which has a hole in its
	# first 4K followed by a non-inlined extent. It should not be possible
	# as well to clone the inline extent from file bar into this file.
	$XFS_IO_PROG -f -c "pwrite -S 0xdd 4K 12K" $SCRATCH_MNT/foo2 \
		| _filter_xfs_io
	$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo2

	# Doing IO against any range in the first 4K of the file should work.
	# Due to a past clone ioctl bug which allowed cloning the inline extent,
	# these operations resulted in EIO errors.
	echo "File foo2 data after clone operation:"
	# All bytes should have the value 0x00 (clone operation failed and did
	# not modify our file).
	od -t x1 $SCRATCH_MNT/foo2
	$XFS_IO_PROG -c "pwrite -S 0xee 0 90" $SCRATCH_MNT/foo2 | _filter_xfs_io

	# Test cloning the inline extent against a file which has a size of zero
	# but has a prealloc extent. It should not be possible as well to clone
	# the inline extent from file bar into this file.
	$XFS_IO_PROG -f -c "falloc -k 0 1M" $SCRATCH_MNT/foo3 | _filter_xfs_io
	$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo3

	# Doing IO against any range in the first 4K of the file should work.
	# Due to a past clone ioctl bug which allowed cloning the inline extent,
	# these operations resulted in EIO errors.
	echo "First 50 bytes of foo3 after clone operation:"
	# Should not be able to read any bytes, file has 0 bytes i_size (the
	# clone operation failed and did not modify our file).
	od -t x1 $SCRATCH_MNT/foo3
	$XFS_IO_PROG -c "pwrite -S 0xff 0 90" $SCRATCH_MNT/foo3 | _filter_xfs_io

	# Test cloning the inline extent against a file which consists of a
	# single inline extent that has a size not greater than the size of
	# bar's inline extent (40 < 50).
	# It should be possible to do the extent cloning from bar to this file.
	$XFS_IO_PROG -f -c "pwrite -S 0x01 0 40" $SCRATCH_MNT/foo4 \
		| _filter_xfs_io
	$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo4

	# Doing IO against any range in the first 4K of the file should work.
	echo "File foo4 data after clone operation:"
	# Must match file bar's content.
	od -t x1 $SCRATCH_MNT/foo4
	$XFS_IO_PROG -c "pwrite -S 0x02 0 90" $SCRATCH_MNT/foo4 | _filter_xfs_io

	# Test cloning the inline extent against a file which consists of a
	# single inline extent that has a size greater than the size of bar's
	# inline extent (60 > 50).
	# It should not be possible to clone the inline extent from file bar
	# into this file.
	$XFS_IO_PROG -f -c "pwrite -S 0x03 0 60" $SCRATCH_MNT/foo5 \
		| _filter_xfs_io
	$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo5

	# Reading the file should not fail.
	echo "File foo5 data after clone operation:"
	# Must have a size of 60 bytes, with all bytes having a value of 0x03
	# (the clone operation failed and did not modify our file).
	od -t x1 $SCRATCH_MNT/foo5

	# Test cloning the inline extent against a file which has no extents but
	# has a size greater than bar's inline extent (16K > 50).
	# It should not be possible to clone the inline extent from file bar
	# into this file.
	$XFS_IO_PROG -f -c "truncate 16K" $SCRATCH_MNT/foo6 | _filter_xfs_io
	$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo6

	# Reading the file should not fail.
	echo "File foo6 data after clone operation:"
	# Must have a size of 16K, with all bytes having a value of 0x00 (the
	# clone operation failed and did not modify our file).
	od -t x1 $SCRATCH_MNT/foo6

	# Test cloning the inline extent against a file which has no extents but
	# has a size not greater than bar's inline extent (30 < 50).
	# It should be possible to clone the inline extent from file bar into
	# this file.
	$XFS_IO_PROG -f -c "truncate 30" $SCRATCH_MNT/foo7 | _filter_xfs_io
	$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo7

	# Reading the file should not fail.
	echo "File foo7 data after clone operation:"
	# Must have a size of 50 bytes, with all bytes having a value of 0xbb.
	od -t x1 $SCRATCH_MNT/foo7

	# Test cloning the inline extent against a file which has a size not
	# greater than the size of bar's inline extent (20 < 50) but has
	# a prealloc extent that goes beyond the file's size. It should not be
	# possible to clone the inline extent from bar into this file.
	$XFS_IO_PROG -f -c "falloc -k 0 1M" \
			-c "pwrite -S 0x88 0 20" \
			$SCRATCH_MNT/foo8 | _filter_xfs_io
	$CLONER_PROG -s 0 -d 0 -l 0 $SCRATCH_MNT/bar $SCRATCH_MNT/foo8

	echo "File foo8 data after clone operation:"
	# Must have a size of 20 bytes, with all bytes having a value of 0x88
	# (the clone operation did not modify our file).
	od -t x1 $SCRATCH_MNT/foo8

	_scratch_unmount
}

echo -e "\nTesting without compression and without the no-holes feature...\n"
test_cloning_inline_extents

echo -e "\nTesting with compression and without the no-holes feature...\n"
test_cloning_inline_extents "" "-o compress"

echo -e "\nTesting without compression and with the no-holes feature...\n"
test_cloning_inline_extents "-O no-holes" ""

echo -e "\nTesting with compression and with the no-holes feature...\n"
test_cloning_inline_extents "-O no-holes" "-o compress"

status=0
exit
