Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1447
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.1+deb8u2
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://pam.sourceforge.net/

Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 306
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses (5.9+20140913-1)
Version: 5.9+20140913-1+b1
Depends: libtinfo5 (= 5.9+20140913-1+b1), libc6 (>= 2.15)
Pre-Depends: multiarch-support, libtinfo5 (>= 5.9-3)
Recommends: libgpm2
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: http://invisible-island.net/ncurses/

Package: dmeventd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 119
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: lvm2 (2.02.111-2.2+deb8u1)
Version: 2:1.02.90-2.2+deb8u1
Depends: libc6 (>= 2.15), libdevmapper-event1.02.1 (>= 2:1.02.74), libdevmapper1.02.1 (>= 2:1.02.90), liblvm2cmd2.02 (>= 2.02.111), init-system-helpers (>= 1.18~)
Description: Linux Kernel Device Mapper event daemon
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.
 .
 This package contains a daemon to monitor events of devmapper devices.
Homepage: http://sources.redhat.com/lvm2/

Package: libaudit1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 157
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: audit (1:2.4-1)
Version: 1:2.4-1+b1
Depends: libaudit-common (>= 1:2.4-1), libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: http://people.redhat.com/sgrubb/audit/

Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 109
Maintainer: Matthias Klose <doko@debian.org>
Architecture: all
Multi-Arch: foreign
Source: readline6
Version: 6.3-8
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: makedev
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 126
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2.3.1-93
Depends: base-passwd (>= 3.0.4)
Conflicts: udev (<= 0.024-7)
Description: creates device files in /dev
 The MAKEDEV executable is used to create device files, often in /dev.
 .
 Device files are special files through which applications can interact
 with hardware.
 .
 This package is not necessary for most modern Linux systems, where the udev
 subsystem provides a more dynamic mechanism for device file management.

Package: libtinfo5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 480
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses (5.9+20140913-1)
Version: 5.9+20140913-1+b1
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Breaks: dialog (<< 1.2-20130523)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: http://invisible-island.net/ncurses/

Package: libgdbm3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 85
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.8.3-13.1
Depends: libc6 (>= 2.14), dpkg (>= 1.15.4) | install-info
Pre-Depends: multiarch-support
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Homepage: http://directory.fsf.org/project/gdbm/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 5097
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Source: perl
Version: 5.20.2-3+deb8u6
Replaces: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perl5-base, perlapi-5.20.0, perlapi-5.20.1, perlapi-5.20.2
Pre-Depends: libc6 (>= 2.14), dpkg (>= 1.17.17)
Suggests: perl
Breaks: autoconf2.13 (<< 2.13-45), libalien-wxwidgets-perl (<< 0.65+dfsg-2), libanyevent-perl (<< 7.070-2), libcommon-sense-perl (<< 3.72-2~), libfile-path-perl (<< 2.09), libfile-spec-perl (<< 3.4801), libfile-temp-perl (<< 0.2304), libgtk2-perl-doc (<< 2:1.2491-4), libio-socket-ip-perl (<< 0.29), libjcode-perl (<< 2.13-3), libmarc-charset-perl (<< 1.2), libscalar-list-utils-perl (<< 1:1.38), libsocket-perl (<< 2.013), libxsloader-perl (<< 0.17), pdl (<< 1:2.007-4), perl (<< 5.20.0~)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/

Package: libudev1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 132
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 215-17+deb8u6
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: libudev shared library
 This library provides access to udev device information.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: strace
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 990
Maintainer: Steve McIntyre <93sam@debian.org>
Architecture: amd64
Version: 4.9-2
Depends: libc6 (>= 2.15)
Description: System call tracer
 strace is a system call tracer, i.e. a debugging tool which prints out
 a trace of all the system calls made by a another process/program.
 The program to be traced need not be recompiled for this, so you can
 use it on binaries for which you don't have source.
 .
 System calls and signals are events that happen at the user/kernel
 interface. A close examination of this boundary is very useful for bug
 isolation, sanity checking and attempting to capture race conditions.
Homepage: http://sourceforge.net/projects/strace/

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 648
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.11+dfsg-4.1+deb8u1
Replaces: cpio-mt
Depends: libc6 (>= 2.17)
Suggests: libarchive1
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: http://www.gnu.org/software/cpio/

Package: libpopt0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 131
Maintainer: Paul Martin <pm@debian.org>
Architecture: amd64
Multi-Arch: same
Source: popt
Version: 1.16-10
Replaces: popt
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Conflicts: libpopt-dev (<= 1.4-1), popt, rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Homepage: http://rpm5.org/

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 30
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: attr
Version: 1:2.4.47-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: http://savannah.nongnu.org/projects/attr/

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 116
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.5~WIP.2017.04.26-1
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2, libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net

Package: libexpat1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 347
Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.1.0-6+deb8u3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Conflicts: wink (<= 1.5.1060-4)
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML. Expat is a stream-oriented parser in
 which an application registers handlers for things the parser
 might find in the XML document (like start tags).
Homepage: http://expat.sourceforge.net

Package: less
Status: install ok installed
Priority: important
Section: text
Installed-Size: 253
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 458-3
Depends: libc6 (>= 2.14), libtinfo5, debianutils (>= 1.8)
Description: pager program similar to more
 This package provides "less", a file pager (that is, a memory-efficient
 utility for displaying text one screenful at a time). Less has many
 more features than the basic pager "more". As part of the GNU project,
 it is widely regarded as the standard pager on UNIX-derived systems.
 .
 Also provided are "lessecho", a simple utility for ensuring arguments
 with spaces are correctly quoted; "lesskey", a tool for modifying the
 standard (vi-like) keybindings; and "lesspipe", a filter for specific
 types of input, such as .doc or .txt.gz files.
Homepage: http://www.greenwoodsoftware.com/less/

Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 309
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: xz-utils (5.1.1alpha+20120614-2)
Version: 5.1.1alpha+20120614-2+b3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: http://tukaani.org/xz/

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 248
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.1+deb8u2
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://pam.sourceforge.net/

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1272
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.20-4.1
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.14), libpcre3 (>= 1:8.35)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: http://www.gnu.org/software/grep/

Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 764
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 22.21-2
Replaces: procps (<< 1:1.2)
Depends: libc6 (>= 2.14), libtinfo5
Description: utilities that use the proc file system
 This package contains miscellaneous utilities that use the proc FS:
 .
  - fuser: identifies processes that are using files or sockets.
  - killall: kills processes by name (e.g. "killall -HUP named").
  - peekfd: shows the data traveling over a file descriptor.
  - pstree: shows currently running processes as a tree.
  - prtstat: print the contents of /proc/<pid>/stat
Homepage: http://psmisc.sf.net/

Package: libssl1.0.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3075
Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 1.0.1t-1+deb8u5
Depends: libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 185
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5.37
Replaces: base
Depends: libc6 (>= 2.8), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: e2fslibs
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 477
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.5~WIP.2017.04.26-1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net

Package: time
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 108
Maintainer: Bob Proulx <bob@proulx.com>
Architecture: amd64
Version: 1.7-25
Depends: libc6 (>= 2.3.4)
Description: GNU time program for measuring CPU resource usage
 The 'time' command runs another program, then displays information
 about the resources used by that program, collected by the system while
 the program was running.  You can select which information is reported
 and the format in which it is shown, or have 'time' save the information
 in a file instead of display it on the screen.
 .
 The resources that 'time' can report on fall into the general
 categories of time, memory, I/O, and IPC calls.
 .
 The GNU version can format the output in arbitrary ways by using a
 printf-style format string to include various resource measurements.
Homepage: http://www.gnu.org/software/time

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 147
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: debianutils (4.4)
Version: 4.4+b1
Replaces: manpages-pl (<< 1:0.5)
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 tempfile which

Package: dbench
Status: install ok installed
Priority: extra
Section: utils
Installed-Size: 25733
Maintainer: Mattias Nordstrom <mnordstr@debian.org>
Architecture: amd64
Version: 4.0-2
Depends: libc6 (>= 2.3), libpopt0 (>= 1.14)
Description: The dbench (disk) and tbench (TCP) benchmarks
 dbench and tbench simulate the load of the netbench "industry
 standard" benchmark used to rate (windows) file servers.  Unlike netbench,
 they do not require a lab of Microsoft Windows PCs: dbench produces
 the filesystem load on a netbench run, and tbench produces the
 network load, allowing simpler bottleneck isolation.
 .
 Note that this benchmark is *not* a realistic reflection of normal
 server load.
Homepage: http://samba.org/ftp/tridge/dbench/

Package: libgcrypt20
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1002
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.6.3-2+deb8u2
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.14)
Pre-Depends: multiarch-support
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Camellia, IDEA, Salsa, CRC, MD4, MD5, RIPE-MD160, SHA-1, SHA-256, SHA-512,
 Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC.
Homepage: http://directory.fsf.org/project/libgcrypt/

Package: libncursesw5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 388
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses (5.9+20140913-1)
Version: 5.9+20140913-1+b1
Depends: libtinfo5 (= 5.9+20140913-1+b1), libc6 (>= 2.15)
Pre-Depends: multiarch-support
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: http://invisible-island.net/ncurses/

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 5010
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.3-11+deb8u1
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.15), libncurses5 (>= 5.5-5~), libtinfo5
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/bash.bashrc 87b895cef45b8090d628a1d9a0f4bfb8
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc e62ae447bdd228160f1f0b6bab8a7fd3
 /etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 89
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.25.2-6
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.

Package: libsigsegv2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 71
Maintainer: Debian Common Lisp Team <pkg-common-lisp-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsigsegv (2.10-4)
Version: 2.10-4+b1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Library for handling page faults in a portable way
 GNU libsigsegv is a library that allows handling page faults in a
 portable way. It is used e.g. for generational garbage collectors
 and stack overflow handlers.
 .
 This package contains the shared library.
Homepage: http://libsigsegv.sourceforge.net/

Package: libdb5.3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1812
Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28-9
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Homepage: http://www.oracle.com/technology/software/products/berkeley-db/index.html

Package: libcap2-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 110
Maintainer: Christian Kastner <debian@kvr.at>
Architecture: amd64
Multi-Arch: foreign
Source: libcap2
Version: 1:2.24-8
Replaces: libcap-bin
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10)
Recommends: libpam-cap
Breaks: libcap-bin
Description: POSIX 1003.1e capabilities (utilities)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains additional utilities.
Homepage: http://sites.google.com/site/fullycapable/

Package: debconf
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 614
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.5.56
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/bash_completion.d/debconf 8fa1862734fbe54d7178aaaa419f5a11
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: debconf-i18n
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 1091
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Source: debconf
Version: 1.5.56
Replaces: debconf (<< 1.3.0), debconf-utils (<< 1.3.22)
Depends: debconf (= 1.5.56), liblocale-gettext-perl, libtext-iconv-perl, libtext-wrapi18n-perl, libtext-charwidth-perl
Conflicts: debconf-english, debconf-utils (<< 1.3.22)
Description: full internationalization support for debconf
 This package provides full internationalization for debconf, including
 translations into all available languages, support for using translated
 debconf templates, and support for proper display of multibyte character
 sets.

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 179
Maintainer: Mark Brown <broonie@debian.org>
Architecture: amd64
Multi-Arch: same
Source: zlib (1:1.2.8.dfsg-2)
Version: 1:1.2.8.dfsg-2+b1
Provides: libz1
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/

Package: lvm2
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1624
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.02.111-2.2+deb8u1
Depends: libc6 (>= 2.15), libdevmapper-event1.02.1 (>= 2:1.02.74), libdevmapper1.02.1 (>= 2:1.02.90), libreadline5 (>= 5.2), libudev1 (>= 183), init-system-helpers (>= 1.18~), lsb-base, dmsetup (>> 2:1.02.47), dmeventd (>> 2:1.02.90), initscripts (>= 2.88dsf-13.3)
Suggests: thin-provisioning-tools
Breaks: initramfs-tools (<< 0.99), thin-provisioning-tools (<< 0.3.2)
Conffiles:
 /etc/init.d/lvm2 70063dce3a90eca5ef673579e5fcc402
 /etc/lvm/lvm.conf c3219a98322101a8c4d20497ad3d4bee
Description: Linux Logical Volume Manager
 This is LVM2, the rewrite of The Linux Logical Volume Manager.  LVM
 supports enterprise level volume management of disk and disk subsystems
 by grouping arbitrary disks into volume groups. The total capacity of
 volume groups can be allocated to logical volumes, which are accessed as
 regular block devices.
Homepage: http://sources.redhat.com/lvm2/

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 59
Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>
Architecture: amd64
Version: 3.15
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.

Package: bash-completion
Status: install ok installed
Priority: standard
Section: shells
Installed-Size: 929
Maintainer: Bash Completion Maintainers <bash-completion-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1:2.1-4
Replaces: bash, cryptsetup (<< 2:1.1.2-2), xen-tools (<= 4.1-1)
Depends: bash (>= 3.2)
Pre-Depends: dpkg (>= 1.15.7.2~)
Breaks: xen-tools (<= 4.1-1)
Conffiles:
 /etc/profile.d/bash_completion.sh 749e4786543bc3d19e20b0e214806c35
 /etc/bash_completion a81b3f1cb197219b815942f4fc7fa94e
Description: programmable completion for the bash shell
 bash completion extends bash's standard completion behavior to achieve
 complex command lines with just a few keystrokes.  This project was
 conceived to produce programmable completion routines for the most
 common Linux/UNIX commands, reducing the amount of typing sysadmins
 and programmers need to do on a daily basis.
Homepage: http://bash-completion.alioth.debian.org

Package: multiarch-support
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 194
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.19-18+deb8u7
Depends: libc6 (>= 2.3.6-2)
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 1551
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2016j-0+deb8u1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-jessie
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: http://www.iana.org/time-zones

Package: init
Essential: yes
Status: install ok installed
Priority: required
Section: metapackages
Installed-Size: 29
Maintainer: pkg-systemd-maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: init-system-helpers
Version: 1.22
Pre-Depends: systemd-sysv | sysvinit-core | upstart
Description: System-V-like init utilities - metapackage
 This package is an essential metapackage which allows you to select from
 three available init systems in Debian (systemd, sysvinit, upstart) while
 ensuring that one of these is available on the system at all times.

Package: systemd-sysv
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 79
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: systemd
Version: 215-17+deb8u6
Replaces: sysvinit (<< 2.88dsf-44~), sysvinit-core, upstart
Depends: systemd (= 215-17+deb8u6)
Pre-Depends: systemd
Conflicts: sysvinit-core, upstart
Description: system and service manager - SysV links
 systemd is a replacement for sysvinit.  It is dependency-based and
 able to read the LSB init script headers in addition to parsing rcN.d
 links as hints.
 .
 It also provides process supervision using cgroups and the ability to
 not only depend on other init script being started, but also
 availability of a given mount point or dbus service.
 .
 This package provides the manual pages and links needed for systemd
 to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
 link to systemd.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 198
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.3.3-17
Provides: awk
Pre-Depends: libc6 (>= 2.11)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 239
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: amd64
Version: 1.6-4
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.17)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.

Package: dump
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 592
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Version: 0.4b44-5
Depends: e2fslibs (>= 1.37), libblkid1 (>= 2.16), libc6 (>= 2.15), libcomerr2 (>= 1.01), libreadline6 (>= 6.0), libselinux1 (>= 1.32), libtinfo5, libuuid1 (>= 2.16), tar (>= 1.13.92-3)
Description: 4.4bsd dump and restore for ext2 filesystems
 Dump examines files on a filesystem and determines which files need to be
 backed up.  These files are copied to the given disk, tape or other storage
 medium for safe keeping.
 .
 The restore command performs the inverse function of dump.  A full backup of
 a file system may be restored and subsequent incremental backups layered on
 top of it.  Single files and directory subtrees may be restored from full or
 partial backups.
Homepage: http://dump.sourceforge.net/

Package: libcap2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 61
Maintainer: Christian Kastner <debian@kvr.at>
Architecture: amd64
Multi-Arch: same
Version: 1:2.24-8
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Homepage: http://sites.google.com/site/fullycapable/

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 181
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.25.2-6)
Version: 1:2.25.2-6
Pre-Depends: libc6 (>= 2.15), libsystemd0
Recommends: bsdmainutils
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a
 Debian system: logger, renice, script, scriptreplay, and wall. The
 remaining standard BSD utilities are provided by bsdmainutils.

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 191
Maintainer: Gerrit Pape <pape@smarden.org>
Architecture: amd64
Source: dash (0.5.7-4)
Version: 0.5.7-4+b1
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.14)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: perl-modules
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 15108
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.20.2-3+deb8u6
Replaces: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcgi-pm-perl, libcpan-meta-perl, libcpan-meta-requirements-perl, libcpan-meta-yaml-perl, libdigest-perl, libexperimental-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-spec-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-build-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libnet-perl, libnet-ping-perl, libpackage-constants-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libtest-harness-perl, libtest-simple-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, podlators-perl
Provides: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcpan-meta-perl, libcpan-meta-requirements-perl, libcpan-meta-yaml-perl, libdigest-perl, libexperimental-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-spec-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libnet-perl, libnet-ping-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libtest-harness-perl, libtest-simple-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, podlators-perl
Depends: perl-base (>= 5.20.2-3+deb8u6)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: perl (>= 5.20.2-1), libarchive-extract-perl, libmodule-pluggable-perl, libpod-latex-perl, libterm-ui-perl, libtext-soundex-perl, libcgi-pm-perl, libmodule-build-perl, libpackage-constants-perl
Suggests: libb-lint-perl, libcpanplus-dist-build-perl, libcpanplus-perl, libfile-checktree-perl, liblog-message-simple-perl, liblog-message-perl, libobject-accessor-perl
Breaks: cli-common (<< 0.9+nmu1), libansicolor-perl (<< 4.02), libarchive-tar-perl (<< 1.96), libattribute-handlers-perl (<< 0.96), libautodie-perl (<< 2.23), libcgi-pm-perl (<< 3.65), libcpan-meta-perl (<< 2.140640), libcpan-meta-requirements-perl (<< 2.125), libcpan-meta-yaml-perl (<< 0.012), libdigest-perl (<< 1.17), libexperimental-perl (<< 0.007), libextutils-cbuilder-perl (<< 0.280217), libextutils-command-perl (<< 1.18), libextutils-install-perl (<< 1.67), libextutils-parsexs-perl (<< 3.240000), libfile-spec-perl (<< 3.4801), libhttp-tiny-perl (<< 0.043), libi18n-langtags-perl (<< 0.40), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27203), liblocale-codes-perl (<< 3.30), liblocale-maketext-perl (<< 1.25), liblocale-maketext-simple-perl (<< 0.21), libmath-bigint-perl (<< 1.9993), libmath-complex-perl (<< 1.59), libmodule-build-perl (<< 0.420500), libmodule-corelist-perl (<< 5.20150214), libmodule-load-conditional-perl (<< 0.62), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000019), libnet-perl (<= 1:1.22), libnet-ping-perl (<< 2.43), libpackage-constants-perl (<< 0.04), libparams-check-perl (<< 0.38), libparent-perl (<< 0.228), libparse-cpan-meta-perl (<< 1.4414), libperl-ostype-perl (<< 1.007), libpod-escapes-perl (<< 1.06), libpod-parser-perl (<< 1.62), libpod-simple-perl (<< 3.28), libtest-harness-perl (<< 3.30), libtest-simple-perl (<< 1.001002), libthread-queue-perl (<< 3.05), libtime-local-perl (<< 1.2300), libunicode-collate-perl (<< 1.04), libversion-perl (<< 1:0.9909), libversion-requirements-perl (<< 0.101022), mono-apache-server2 (<< 3.8-2.1), mono-apache-server4 (<< 3.8-2.1), mono-fastcgi-server2 (<< 3.8-2.1), mono-fastcgi-server4 (<< 3.8-2.1), patcher (<< 0.0.20040521-6.1), pdl (<< 1:2.007-4), perl (<< 5.20.2~), podlators-perl (<< 2.3.1), polygen-data (<< 1.0.6.ds2-13.1), pristine-tar (<< 1.33), pure-ftpd-common (<< 1.0.36-3.2), rinse (<< 3.0.7), shorewall (<< 4.6.4.3-2), shorewall-core (<< 4.6.4.3-2), tvtime (<< 1.0.2-14)
Conflicts: defoma (<< 0.11.12), mono-gac (<< 2.10.8.1-3)
Conffiles:
 /etc/perl/sitecustomize.pl 5b3fc409c28ac6baf439b733046f0271
 /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules' directly, they
 should use `perl' (which depends on `perl-modules') instead.
Homepage: http://dev.perl.org/perl5/

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 357
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.25.2-6
Pre-Depends: libc6 (>= 2.17), libmount1 (>= 2.25), libselinux1 (>= 2.0.15), libsmartcols1 (>= 2.25)
Suggests: nfs-common (>= 1:1.1.0-13)
Description: Tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: libsystemd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 214
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 215-17+deb8u6
Pre-Depends: libc6 (>= 2.14), libgcrypt20 (>= 1.6.1), liblzma5 (>= 5.1.1alpha+20120614), multiarch-support
Description: systemd utility library
 The libsystemd0 library provides interfaces to various systemd components.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: keyutils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 167
Maintainer: Christian Kastner <debian@kvr.at>
Architecture: amd64
Source: keyutils (1.5.9-5)
Version: 1.5.9-5+b1
Depends: libc6 (>= 2.15), libkeyutils1 (>= 1.5.9)
Conffiles:
 /etc/request-key.conf bf33ebef2dd99b739d06c67976d549fd
Description: Linux Key Management Utilities
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
Homepage: http://people.redhat.com/~dhowells/keyutils/

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 10229
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.19-18+deb8u7
Replaces: libc6-amd64
Depends: libgcc1
Suggests: glibc-doc, debconf | debconf-2.0, locales
Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.19), locales-all (<< 2.19), lsb-core (<= 3.2-27), nscd (<< 2.19)
Conflicts: prelink (<= 0.0.20090311-1), tzdata (<< 2007k-1), tzdata-etch
Conffiles:
 /etc/ld.so.conf.d/x86_64-linux-gnu.conf 593ad12389ab2b6f952e7ede67b8fbbf
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libprocps3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 132
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: procps
Version: 2:3.3.9-9
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: library for accessing process information from /proc
 The libprocps library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compilied with libprocps.
Homepage: http://gitorious.org/procps

Package: startpar
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 95
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: amd64
Version: 0.59-3
Replaces: sysvinit-utils (<< 2.88dsf-52)
Depends: libc6 (>= 2.15)
Suggests: insserv, sysv-rc
Breaks: sysvinit-utils (<< 2.88dsf-52)
Conffiles:
 /etc/init/startpar-bridge.conf 152b77b1904939b461edc251844d0008
Description: run processes in parallel and multiplex their output
 Used by the sysv-rc boot system executor to run init.d scripts in parallel
 while making sure the script output is not completely messed up.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libpcre3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 618
Maintainer: Mark Baker <mark@mnb.org.uk>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.35-3.3+deb8u4
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the runtime libraries.

Package: libdevmapper1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 330
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.02.111-2.2+deb8u1)
Version: 2:1.02.90-2.2+deb8u1
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32), libudev1 (>= 183), dmsetup (>= 2:1.02.90-2.2+deb8u1)
Pre-Depends: multiarch-support
Breaks: lvm2 (<< 2.02.66)
Conflicts: libdevmapper1.02
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).
Homepage: http://sources.redhat.com/lvm2/

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 14249
Maintainer: Michael Stone <mstone@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 8.23-4
Replaces: mktemp, realpath, timeout
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.17), libselinux1 (>= 2.1.13)
Conflicts: timeout
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils

Package: ed
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 128
Maintainer: Martin Zobel-Helas <zobel@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.10-2
Depends: libc6 (>= 2.14)
Description: classic UNIX line editor
 ed is a line-oriented text editor.  It is used to
 create, display, modify and otherwise manipulate text
 files.
 .
 red is a restricted ed: it can only edit files in the
 current directory and cannot execute shell commands.
Homepage: http://www.gnu.org/software/ed/

Package: file
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 76
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: foreign
Version: 1:5.22+15-2+deb8u3
Depends: libc6 (>= 2.4), libmagic1 (= 1:5.22+15-2+deb8u3), zlib1g (>= 1:1.1.4)
Description: Determines file type using "magic" numbers
 File tests each argument in an attempt to classify it. There are
 three sets of tests, performed in this order: filesystem tests,
 magic number tests, and language tests. The first test that
 succeeds causes the file type to be printed.
Homepage: http://www.darwinsys.com/file/

Package: gawk
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 1852
Maintainer: Arthur Loiret <aloiret@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1:4.1.1+dfsg-1
Provides: awk
Pre-Depends: libc6 (>= 2.15), libgmp10, libmpfr4 (>= 3.1.2), libreadline6 (>= 6.0), libsigsegv2 (>= 2.9)
Suggests: gawk-doc
Description: GNU awk, a pattern scanning and processing language
 `awk', a program that you can use to select particular records in a
 file and perform operations upon them.
 .
 Gawk is the GNU Project's implementation of the AWK programming language.
 It conforms to the definition of the language in the POSIX 1003.2 Command
 Language And Utilities Standard. This version in turn is based on the
 description in The AWK Programming Language, by Aho, Kernighan, and
 Weinberger, with the additional features defined in the System V Release
 4 version of UNIX awk. Gawk also provides more recent Bell Labs awk
 extensions, and some GNU-specific extensions.
Homepage: http://www.gnu.org/software/gawk/

Package: libbsd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 121
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libbsd
Version: 0.7.0-2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: utility functions from BSD systems - shared library
 This library provides some C functions such as strlcpy() that are commonly
 available on BSD systems but not on others like GNU systems.
 .
 For a detailed list of the provided functions, please see the libbsd-dev
 package description.
Homepage: http://libbsd.freedesktop.org/

Package: libf2fs0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 54
Maintainer: Filesystems Group <filesystems-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: f2fs-tools
Version: 1.7.0-1.1~bpo8+1
Replaces: f2fs-tools (<< 1.6.0-1)
Depends: libc6 (>= 2.14), libuuid1 (>= 2.16)
Pre-Depends: multiarch-support
Breaks: f2fs-tools (<< 1.6.0-1)
Description: Core libraries for Flash-Friendly File System
 F2FS is a new filesystem for Linux aimed at NAND flash memory-based storage
 devices, such as SSD, eMMC, and SD cards. It is based on Log-structured File
 System (LFS).
 .
 This package contains the core libraries.
Homepage: http://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs-tools.git

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 4179
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: foreign
Version: 1.43.5~WIP.2017.04.26-1
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Pre-Depends: e2fslibs (= 1.43.5~WIP.2017.04.26-1), libblkid1 (>= 2.17.2), libc6 (>= 2.14), libcomerr2 (>= 1.42~WIP-2011-10-05-1), libss2 (>= 1.34-1), libuuid1 (>= 2.16), util-linux (>= 2.15~rc1-1)
Suggests: gpart, parted, fuse2fs, e2fsck-static
Conflicts: dump (<< 0.4b4-4), initscripts (<< 2.85-4), quota (<< 1.55-8.1), sysvinit (<< 2.85-4)
Conffiles:
 /etc/mke2fs.conf 22503ecadd27f788ab3e612aded4f5b0
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2261
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.27.1-2+deb8u1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: bzip2, ncompress, xz-utils, tar-scripts
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 114
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: bzip2 (1.0.6-7)
Version: 1.0.6-7+b3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: libkmod2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 134
Maintainer: Marco d'Itri <md@linux.it>
Architecture: amd64
Multi-Arch: same
Source: kmod
Version: 18-3
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 326
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.25.2-6
Depends: libc6 (>= 2.17), libuuid1 (>= 2.16)
Pre-Depends: multiarch-support
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifying
 filesystems by hard-coded device names, but via a logical naming
 system instead.

Package: joe-jupp
Status: install ok installed
Priority: extra
Section: editors
Installed-Size: 178
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: all
Source: jupp
Version: 3.1.28-1
Replaces: joe
Provides: joe
Depends: jupp (>= 3.1.25)
Conflicts: joe
Conffiles:
 /etc/jupp/jmacsrc bdea0c92932f5822bc930d79abf777ad
 /etc/jupp/joerc d0348a2e596130ca4fb8963f2e3b27a6
 /etc/jupp/jpicorc 4a241fce322dd0591013f3bbfbce66d1
 /etc/jupp/jstarrc e2915306087ac01830bcec6cff564236
 /etc/jupp/rjoerc 8a1b8d598bec39ee949100a671676b88
Description: reimplement the joe Debian package using jupp
 This package contains symbolic links to replace the Debian joe package
 using the jupp package and implementation (both binaries and manpages).
 It also contains the appropriate conffiles and, in contrast to Debian's
 joe flavour, supports SELinux context copying (on Debian systems with
 the Linux kernel), and has many bugs fixed and makes some of jupps new
 features available to the joe, jstar, jmacs, jpico and rjoe flavours.
Homepage: https://www.mirbsd.org/jupp.htm

Package: uuid-runtime
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 118
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.25.2-6
Replaces: e2fsprogs (<= 1.40.3-1ubuntu1)
Depends: adduser, passwd, init-system-helpers (>= 1.18~), libc6 (>= 2.4), libsystemd0
Pre-Depends: libuuid1 (>= 2.25-5~)
Conffiles:
 /etc/init.d/uuidd d73ce836c705e13e8da163d42a9b3724
Description: runtime components for the Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.
 .
 This package contains the uuidgen program and the uuidd daemon.
 .
 The uuidd daemon is used to generate UUIDs, especially time-based
 UUID’s, in a secure and guaranteed-unique fashion, even in the face
 of large numbers of threads trying to grab UUID’s running on
 different CPU’s. It is used by libuuid as well as the uuidgen
 program.

Package: bzip2
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 119
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: bzip2 (1.0.6-7)
Version: 1.0.6-7+b3
Replaces: libbz2 (<< 0.9.5d-3)
Depends: libbz2-1.0 (= 1.0.6-7+b3), libc6 (>= 2.14)
Suggests: bzip2-doc
Description: high-quality block-sorting file compressor - utilities
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: libmagic1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 3161
Maintainer: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Architecture: amd64
Multi-Arch: same
Source: file
Version: 1:5.22+15-2+deb8u3
Depends: libc6 (>= 2.15), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Suggests: file
Conffiles:
 /etc/magic 272913026300e7ae9b5e2d51f138e674
 /etc/magic.mime 272913026300e7ae9b5e2d51f138e674
Description: File type determination library using "magic" numbers
 This library can be used to classify files according to magic
 number tests. It implements the core functionality of the file
 command.
Homepage: http://www.darwinsys.com/file/

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 72
Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 4.1+Debian13+nmu1
Description: Linux Standard Base 4.1 init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb

Package: procps
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 670
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2:3.3.9-9
Provides: watch
Depends: libc6 (>= 2.15), libncurses5 (>= 5.5-5~), libncursesw5 (>= 5.6+20070908), libprocps3, libtinfo5, lsb-base (>= 3.0-10), initscripts
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1), xmem (<= 1.20-27.1)
Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3)
Conffiles:
 /etc/init.d/procps 021482ebab1024f5ed76e650e5191e8f
 /etc/sysctl.conf 76c1d8285c578d5e827c3e07b9738112
 /etc/sysctl.d/README.sysctl 026e08987e39bd612ae311f2d9fc2089
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: http://gitorious.org/procps

Package: libdevmapper-event1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 54
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.02.111-2.2+deb8u1)
Version: 2:1.02.90-2.2+deb8u1
Depends: libc6 (>= 2.15), libdevmapper1.02.1 (>= 2:1.02.90)
Pre-Depends: multiarch-support
Description: Linux Kernel Device Mapper event support library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.
 .
 This package contains the userspace library to help with event monitoring
 for devmapper devices, in conjunction with the dmevent daemon.
Homepage: http://sources.redhat.com/lvm2/

Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 17584
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Multi-Arch: allowed
Version: 5.20.2-3+deb8u6
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libmodule-corelist-perl (<< 2.14-2), libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl-base (<< 5.10.1-12), perl-doc (<< 5.8.0-1), perl-modules (<< 5.8.1-1)
Provides: data-dumper, libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl5
Depends: perl-base (= 5.20.2-3+deb8u6), perl-modules (>= 5.20.2-3+deb8u6), libbz2-1.0, libc6 (>= 2.14), libdb5.3, libgdbm3 (>= 1.8.3), zlib1g (>= 1:1.2.2.3)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: netbase, rename
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make
Breaks: dh-make-perl (<< 0.73-1), ftpmirror (<< 1.96+dfsg-13), libcompress-raw-bzip2-perl (<< 2.064), libcompress-raw-zlib-perl (<< 2.065), libcompress-zlib-perl (<< 2.064), libdigest-md5-perl (<< 2.53), libdigest-sha-perl (<< 5.88), libencode-perl (<< 2.63-1+deb8u1), libhtml-template-compiled-perl (<< 0.95-1), libio-compress-base-perl (<< 2.064), libio-compress-bzip2-perl (<< 2.064), libio-compress-perl (<< 2.064), libio-compress-zlib-perl (<< 2.064), libload-perl (<< 0.20-1), libmime-base64-perl (<< 3.14), libnet-jifty-perl (<< 0.14-1), libperl-apireference-perl (<< 0.09-1), libregexp-optimizer-perl (<< 0.15-3), libsoap-lite-perl (<< 0.712-4), libstorable-perl (<< 2.49.01), libsys-syslog-perl (<< 0.33), libthreads-perl (<< 1.93), libthreads-shared-perl (<< 1.46), libtime-hires-perl (<< 1.9726), libtime-piece-perl (<< 1.27), libxml-parser-lite-tree-perl (<< 0.14-1), libyaml-perl (<< 0.73-1), mrtg (<< 2.16.3-3.1), perl-doc (<< 5.20.2-1)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Description: Larry Wall's Practical Extraction and Report Language
 Perl is a highly capable, feature-rich programming language with over
 20 years of development. Perl 5 runs on over 100 platforms from
 portables to mainframes. Perl is suitable for both rapid prototyping
 and large scale development projects.
 .
 Perl 5 supports many programming styles, including procedural,
 functional, and object-oriented. In addition to this, it is supported
 by an ever-growing collection of reusable modules which accelerate
 development. Some of these modules include Web frameworks, database
 integration, networking protocols, and encryption. Perl provides
 interfaces to C and C++ for custom extension development.
Homepage: http://dev.perl.org/perl5/

Package: libgpg-error0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 444
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgpg-error
Version: 1.17-3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Homepage: http://www.gnupg.org/related_software/libgpg-error/

Package: liblvm2cmd2.02
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1301
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: lvm2
Version: 2.02.111-2.2+deb8u1
Depends: libc6 (>= 2.14), libdevmapper-event1.02.1 (>= 2:1.02.74), libdevmapper1.02.1 (>= 2:1.02.90), libudev1 (>= 183), dmeventd (>> 2:1.02.90)
Pre-Depends: multiarch-support
Description: LVM2 command library
 This package contains the lvm2cmd shared library.
Homepage: http://sources.redhat.com/lvm2/

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 413
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 8+deb8u7
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/debian_version 901275afdd9278ae23c429033a63d04e
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
 /etc/issue a7eef95d86c3649a192350845d8cb2ae
 /etc/issue.net 8b9e8badfb7d547ef236e3165dd363e4
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.

Package: libgmp10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 556
Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.0.0+dfsg-6
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Multiprecision arithmetic library
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
 .
 It has a rich set of functions, and the functions have a regular
 interface.
Homepage: http://gmplib.org/

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 110
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0.9
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2453
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.2-3+deb8u1
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules, debianutils (>= 2.15.2)
Conffiles:
 /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: http://pkg-shadow.alioth.debian.org/

Package: init-system-helpers
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 97
Maintainer: pkg-systemd-maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.22
Depends: perl-base (>= 5.20.1-3)
Breaks: systemd (<< 44-12)
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Debian contains (e.g. sysvinit, upstart,
 systemd). An example is deb-systemd-helper, a script that enables systemd unit
 files without depending on a running systemd.
 .
 While this package is maintained by pkg-systemd-maintainers, it is NOT
 specific to systemd at all. Maintainers of other init systems are welcome to
 include their helpers in this package.

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 371
Maintainer: Craig Small <csmall@debian.org>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 5.9+20140913-1
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conflicts: ncurses, ncurses-runtime
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: http://invisible-island.net/ncurses/

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 3254
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.19-18+deb8u7
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: libc6 (>> 2.19), libc6 (<< 2.20)
Breaks: libc0.1 (<< 2.10), libc0.3 (<< 2.10), libc6 (<< 2.10), libc6.1 (<< 2.10)
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libsemanage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 245
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsemanage (2.3-1)
Version: 2.3-1+b1
Depends: libsemanage-common (= 2.3-1), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.14), libselinux1 (>= 2.1.12), libsepol1 (>= 2.1.4), libustr-1.0-1 (>= 1.0.4)
Pre-Depends: multiarch-support
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 6048
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 215-17+deb8u6
Depends: libacl1 (>= 2.2.51-8), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libkmod2 (>= 5~), libselinux1 (>= 2.0.65), libudev1 (= 215-17+deb8u6), adduser, lsb-base (>= 3.0-6), util-linux (>= 2.16), procps
Pre-Depends: debconf (>= 1.4.69) | debconf-2.0
Breaks: consolekit (<< 0.4.6-1), kmod (<< 14), plymouth (<< 0.9.0-7), systemd (<< 215-1)
Conffiles:
 /etc/init.d/udev 988e81a81706a99e7f4b83988b386b00
 /etc/init.d/udev-finish fd3ce194c134bcd790681ea487b19126
 /etc/init/udev-fallback-graphics.conf b8bfe7164e10cd0e53494b243c5728b1
 /etc/init/udev-finish.conf 089140a32d519840674be9a274da1a42
 /etc/init/udev.conf 41c0081f3a830e0902aaff76a53edf98
 /etc/init/udevmonitor.conf b541dfb5aa4958e9a5336ecaec00ca15
 /etc/init/udevtrigger.conf 651ff2421dde80be7ce7ccbf7fa8cf18
 /etc/modprobe.d/fbdev-blacklist.conf 0b9c466830040ec52986cc3ea117bef5
 /etc/udev/udev.conf ae415f84e2967eff580089fb08aa0a61
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: btrfs-progs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3991
Maintainer: Dimitri John Ledkov <xnox@debian.org>
Architecture: amd64
Version: 4.7.3-1~bpo8+1
Replaces: btrfs-tools (<< 4.4.1-1)
Depends: e2fslibs (>= 1.42), libblkid1 (>= 2.17.2), libc6 (>= 2.8), libcomerr2 (>= 1.01), liblzo2-2, libuuid1 (>= 2.16), zlib1g (>= 1:1.2.0)
Breaks: btrfs-tools (<< 4.4.1-1)
Description: Checksumming Copy on Write Filesystem utilities
 Btrfs is a new copy on write filesystem for Linux aimed at implementing
 advanced features while focusing on fault tolerance, repair and easy
 administration.
 .
 This package contains utilities (mkfs, fsck) used to work with btrfs
 and an utility (btrfs-convert) to make a btrfs filesystem from an ext3.
Homepage: http://btrfs.wiki.kernel.org/

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 147
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: amd64
Source: sysvinit
Version: 2.88dsf-59
Replaces: last, sysvinit (<= 2.86.ds1-65)
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32), startpar
Suggests: bootlogd, sash
Breaks: upstart (<< 1.5-0ubuntu5)
Conflicts: chkconfig (<< 11.0-79.1-2), last, startpar (<< 0.58-2), sysvconfig
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, last, lastb, mesg, pidof, service, sulogin
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: xz-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 472
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: amd64
Multi-Arch: foreign
Source: xz-utils (5.1.1alpha+20120614-2)
Version: 5.1.1alpha+20120614-2+b3
Replaces: lzip (<< 1.8~rc2), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.14), liblzma5 (>= 5.1.1alpha+20120614)
Breaks: lzip (<< 1.8~rc2)
Conflicts: lzma (<< 9.22-1), xz-lzma
Description: XZ-format compression utilities
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 This package provides the command line tools for working with XZ
 compression, including xz, unxz, xzcat, xzgrep, and so on. They can
 also handle the older LZMA format, and if invoked via appropriate
 symlinks will emulate the behavior of the commands in the lzma
 package.
 .
 The XZ format is similar to the older LZMA format but includes some
 improvements for general use:
 .
  * 'file' magic for detecting XZ files;
  * crc64 data integrity check;
  * limited random-access reading support;
  * improved support for multithreading (not used in xz-utils);
  * support for flushing the encoder.
Homepage: http://tukaani.org/xz/

Package: libtext-iconv-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 92
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Source: libtext-iconv-perl (1.7-5)
Version: 1.7-5+b2
Depends: libc6 (>= 2.2.5), perl-base (>= 5.20.0-4), perlapi-5.20.0
Description: converts between character sets in Perl
 The iconv() family of functions from XPG4 defines an API for converting
 between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
 are provided by libc6.
 .
 This package allows access to them from Perl via the Text::Iconv
 package.
Homepage: http://search.cpan.org/search?module=Text::Iconv

Package: dc
Status: install ok installed
Priority: standard
Section: math
Installed-Size: 168
Maintainer: Ryan Kavanagh <rak@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: bc
Version: 1.06.95-9
Depends: libc6 (>= 2.14)
Description: GNU dc arbitrary precision reverse-polish calculator
 GNU dc is a reverse-polish desk calculator which supports unlimited
 precision arithmetic.  It also allows you to define and call macros.
 .
 A reverse-polish calculator stores numbers on a stack. Entering a number
 pushes it on the stack.  Arithmetic operations pop arguments off the
 stack and push the results.
Homepage: http://ftp.gnu.org/gnu/bc/

Package: libtext-wrapi18n-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 28
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Version: 0.06-7
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
 This module is a substitution for Text::Wrap, supporting
 multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth
 characters such as east Asian characters, combining characters
 such as diacritical marks and Thai, and languages which don't
 use whitespaces between words such as Chinese and Japanese.
 .
 It provides wrap().
Homepage: http://search.cpan.org/search?module=Text::WrapI18N

Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 65
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 2.3-1
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Conffiles:
 /etc/selinux/semanage.conf e69d42a4d98a93c3b8e201bdda367c55
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: libdebconfclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 53
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.192
Depends: libc6 (>= 2.2.5)
Pre-Depends: multiarch-support
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. This is a reimplementation of the original debconf version
 in C.
 .
 This is the libraries needed by libdebconfclient-dev and cdebconf.

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 213
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libselinux
Version: 2.3-2
Depends: libc6 (>= 2.14), libpcre3 (>= 8.10)
Pre-Depends: multiarch-support
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Homepage: http://userspace.selinuxproject.org/

Package: systemd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 11800
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Version: 215-17+deb8u6
Depends: libacl1 (>= 2.2.51-8), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.19.1), libcap2 (>= 1:2.10), libcryptsetup4 (>= 2:1.4.3), libkmod2 (>= 5~), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.1.9), libsystemd0 (= 215-17+deb8u6), util-linux (>= 2.19.1-2), mount (>= 2.21), initscripts (>= 2.88dsf-53.2), sysv-rc, udev (>= 208-8), acl, adduser, libcap2-bin
Pre-Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.6.1), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 1.32)
Recommends: libpam-systemd, dbus
Suggests: systemd-ui
Breaks: lsb-base (<< 4.1+Debian4), lvm2 (<< 2.02.104-1), systemd-shim (<< 8-2)
Conflicts: klogd
Conffiles:
 /etc/dbus-1/system.d/org.freedesktop.hostname1.conf f55c94d000b5d62b5f06d38852977dd1
 /etc/dbus-1/system.d/org.freedesktop.locale1.conf 5893ab03e7e96aa3759baceb4dd04190
 /etc/dbus-1/system.d/org.freedesktop.login1.conf 96bf488f3da8f0ca813cc78e71eeb605
 /etc/dbus-1/system.d/org.freedesktop.machine1.conf d658acaf7192de735ab798c58ab149ae
 /etc/dbus-1/system.d/org.freedesktop.systemd1.conf 46533268285a0df22b1f1667ddc05642
 /etc/dbus-1/system.d/org.freedesktop.timedate1.conf 682369fbf3de26b21e775732c89a2bbe
 /etc/pam.d/systemd-user aebb8b8a2c698614b00961f327a683ef
 /etc/systemd/bootchart.conf 838a83315ad2f9d4c4b7f20b7475ba28
 /etc/systemd/journald.conf 51f19202dcc5aff6d2c3448dbf92f354
 /etc/systemd/logind.conf 747ae2312b6922546190bf806d8d12be
 /etc/systemd/resolved.conf 81a9c57d4eb587decc49040595674c5a
 /etc/systemd/system.conf 3d0e13a72d72acb55409a831b72a15e6
 /etc/systemd/timesyncd.conf 605e4f25097b8ea22f2f5cb3fde3f13c
 /etc/systemd/user.conf 9eaad8fbb7bb6230d4b28abb76b4e81c
Description: system and service manager
 systemd is a replacement for sysvinit.  It is dependency-based and
 able to read the LSB init script headers in addition to parsing rcN.d
 links as hints.
 .
 It also provides process supervision using cgroups and the ability to
 not only depend on other init script being started, but also
 availability of a given mount point or dbus service.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/bin/systemd or install systemd-sysv in addition.
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6643
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: amd64
Multi-Arch: foreign
Version: 1.17.27
Replaces: manpages-it (<< 2.80-4)
Pre-Depends: libbz2-1.0, libc6 (>= 2.14), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 2.3), zlib1g (>= 1:1.1.4), tar (>= 1.23)
Suggests: apt
Breaks: apt (<< 0.7.7~), apt-cudf (<< 3.3~beta1-3~), aptitude (<< 0.4.7-1~), auctex (<< 11.87-3+deb8u1~), ccache (<< 3.1.10-1~), cups (<< 1.7.5-10~), debian-security-support (<< 2014.10.26~), distcc (<< 3.1-6.1~), doc-base (<< 0.10.5~), dpkg-dev (<< 1.15.8), fontconfig (<< 2.11.0-6.2~), fusionforge-plugin-mediawiki (<< 5.3.2+20141104-3~), gap-core (<< 4r7p5-2~), gitweb (<< 1:2.1.4-2.1~), grace (<< 1:5.1.24-3~), gxine (<< 0.5.908-3.1~), hoogle (<< 4.2.33-4~), icecc (<< 1.0.1-2~), install-info (<< 5.1.dfsg.1-3~), libapache2-mod-php5 (<< 5.6.4+dfsg-3~), libapache2-mod-php5filter (<< 5.6.4+dfsg-3~), libdpkg-perl (<< 1.15.8), libjs-protoaculous (<< 5~), man-db (<< 2.6.3-6~), mcollective (<< 2.6.0+dfsg-2.1~), php5-fpm (<< 5.6.4+dfsg-3~), pypy (<< 2.4.0+dfsg-3~), readahead-fedora (<< 2:1.5.6-5.2~), wordpress (<< 4.1+dfsg-1~), xfonts-traditional (<< 1.7~), xine-ui (<< 0.99.9-1.2~)
Conflicts: ada-mode (<< 3.6-3+rm), ada-reference-manual (<< 20021112web-4~), asn1-mode (<< 2.7-7~), bogosort (<< 0.4.2-3~), cl-yacc (<< 0.3-3~), cpp-4.1-doc (<< 4.1.2.nf2-4~), cpp-4.2-doc (<< 4.2.4.nf1-4~), gcc-4.1-doc (<< 4.1.2.nf2-4~), gcc-4.2-doc (<< 4.2.4.nf1-4~), gcj-4.1-doc (<< 4.1.2.nf2-4~), gcj-4.2-doc (<< 4.2.4.nf1-4~), gfortran-4.1-doc (<< 4.1.2.nf2-4~), gfortran-4.2-doc (<< 4.2.4.nf1-4~), ggz-docs (<< 0.0.14.1-2~), glame (<< 2.0.1-6~), gnat-4.1-doc (<< 4.1.2.nf2-4~), gnat-4.2-doc (<< 4.2.4.nf1-4~), gtalk (<< 0.99.10-16~), libalogg-dev (<< 1.3.7-2~), libgtk1.2-doc (<< 1.2.10-19~), libnettle-dev (<< 2~), liborbit-dev (<< 0.5.17-12~), libreadline5-dev (<< 5.2-8~), librep-doc (<< 0.90~), mmucl (<< 1.5.2-3~), nxml-mode (<< 20041004-9~), octave2.1-info (<< 1:2.1.73-19+rm), octave3.0-info (<< 1:3.0.5-7+rm), octave3.2-info (<< 3.2.4-12+rm), polgen-doc (<< 1.3-3+rm), r6rs-doc (<< 1.0-2~), serveez-doc (<< 0.1.5-3~), slat (<< 2.0-6~), texlive-base-bin-doc (<< 2007.dfsg.2-9~), ttcn-el (<< 0.6.9-2~), ulog-acctd (<< 0.4.3-3~), xconq-doc (<< 7.4.1-5~), zenirc (<< 2.112.dfsg-1~)
Conffiles:
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/cron.daily/dpkg b8065b6bfc248caba501c3f5bb508e66
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: sysv-rc
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 125
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59
Replaces: file-rc
Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10), startpar
Recommends: lsb-base (>= 3.2-14)
Suggests: bum
Breaks: initscripts (<< 2.86.ds1-63)
Conflicts: file-rc
Description: System-V-like runlevel change mechanism
 This package provides support for the System-V like system
 for booting, changing runlevels, and shutting down,
 configured through symbolic links in /etc/rc?.d/.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: liblocale-gettext-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 37
Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Architecture: amd64
Source: liblocale-gettext-perl (1.05-8)
Version: 1.05-8+b1
Depends: libc6 (>= 2.2.5)
Pre-Depends: perl-base (>= 5.20.0-4), perlapi-5.20.0
Description: module using libc functions for internationalization in Perl
 The gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().
Homepage: https://metacpan.org/release/gettext

Package: libmpfr4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 789
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Multi-Arch: same
Source: mpfr4
Version: 3.1.2-2
Depends: libc6 (>= 2.14), libgmp10
Pre-Depends: multiarch-support
Conflicts: libgmp3 (<< 4.1.4-3)
Description: multiple precision floating-point computation
 MPFR provides a library for multiple-precision floating-point computation
 with correct rounding.  The computation is both efficient and has a
 well-defined semantics. It copies the good ideas from the
 ANSI/IEEE-754 standard for double-precision floating-point arithmetic
 (53-bit mantissa).
Homepage: http://www.mpfr.org/

Package: dmsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 123
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: lvm2 (2.02.111-2.2+deb8u1)
Version: 2:1.02.90-2.2+deb8u1
Depends: libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.90), util-linux (>> 2.16)
Conflicts: devicekit-disks (<< 009)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but EVMS, software
 raid, and other drivers that create "virtual" block devices.
 .
 This package contains a utility for modifying device mappings.
Homepage: http://sources.redhat.com/lvm2/

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 950
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Source: diffutils (1:3.3-1)
Version: 1:3.3-1+b1
Replaces: diff
Pre-Depends: libc6 (>= 2.17)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: http://www.gnu.org/software/diffutils/

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 860
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.1+deb8u2
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.15), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.1+deb8u2)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005
 /etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89
 /etc/security/namespace.init b46b23d64860d1557d2a8f44b231fd54
 /etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://pam.sourceforge.net/

Package: insserv
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 183
Maintainer: Petter Reinholdtsen <pere@debian.org>
Architecture: amd64
Version: 1.14.0-5
Depends: libc6 (>= 2.7)
Suggests: bootchart2
Breaks: sysv-rc (<< 2.87dsf-3)
Conffiles:
 /etc/bash_completion.d/insserv 32975fe14795d6fce1408d5fd22747fd
 /etc/insserv.conf b15785c0c4b022a3ba0edb78ba71297c
Description: boot sequence organizer using LSB init.d script dependency information
 The insserv program is used by the standard SysV-based init system. It
 updates the order of symlinks in /etc/rc?.d/ based on dependencies
 specified by LSB headers in the init.d scripts themselves.
 .
 These declared relations between scripts make it possible to optimize
 the boot sequence for the currently installed set of packages, while
 detecting and rejecting dependency loops.
 .
 Using insserv incorrectly can result in an unbootable system.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: gcc-4.9-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 218
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-4.9
Version: 4.9.2-10
Breaks: dehydra (<= 0.9.hg20110609-2), gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: binutils
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 20566
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Version: 2.25-5
Replaces: binutils-gold (<< 2.20.51.20100415), binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3)
Provides: binutils-gold, elf-binutils
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.2.0)
Suggests: binutils-doc (>= 2.25-5)
Breaks: binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3)
Conflicts: binutils-gold (<< 2.20.51.20100415), binutils-mingw-w64-i686 (<< 2.23.52.20130612-1+3), binutils-mingw-w64-x86-64 (<< 2.23.52.20130612-1+3), elf-binutils, gas, modutils (<< 2.4.19-1)
Description: GNU assembler, linker and binary utilities
 The programs in this package are used to assemble, link and manipulate
 binary and object files.  They may be used in conjunction with a compiler
 and various libraries to build programs.

Package: libaudit-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 49
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:2.4-1
Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2)
Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2)
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: http://people.redhat.com/sgrubb/audit/

Package: libtext-charwidth-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 85
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Source: libtext-charwidth-perl (0.04-7)
Version: 0.04-7+b3
Depends: libc6 (>= 2.2.5), perl-base (>= 5.20.0-4), perlapi-5.20.0
Description: get display widths of characters on the terminal
 This module permits perl software to get the display widths of characters
 and strings on the terminal, using wcwidth() and wcswidth() from libc.
 .
 It provides mbwidth(), mbswidth(), and mblen().
Homepage: http://search.cpan.org/search?module=Text::CharWidth

Package: libcomerr2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 103
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.5~WIP.2017.04.26-1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1406
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: findutils (4.4.2-9)
Version: 4.4.2-9+b1
Pre-Depends: libc6 (>= 2.17)
Suggests: mlocate | locate
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: http://savannah.gnu.org/projects/findutils/

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 252
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.1+deb8u2
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://pam.sourceforge.net/

Package: libcap-ng0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 59
Maintainer: Pierre Chifflier <pollux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcap-ng
Version: 0.7.4-2
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: An alternate POSIX capabilities library
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains header files and libraries for libcap-ng.
Homepage: http://people.redhat.com/sgrubb/libcap-ng

Package: dbus
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 882
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.8.22-0+deb8u1
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libcap-ng0, libdbus-1-3 (>= 1.7.6), libexpat1 (>= 2.0.1), libselinux1 (>= 2.0.65), libsystemd0, adduser, lsb-base (>= 3.2-14)
Suggests: dbus-x11
Conffiles:
 /etc/dbus-1/session.conf b96c3a72dbcf8d8019f8d9b3b0c1b743
 /etc/dbus-1/system.conf cc9caaf3b2f4a11f188bf81f0e59eabb
 /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015
 /etc/init.d/dbus ec9a7d183ec50837a12aca3f9c95cc27
Description: simple interprocess messaging system (daemon and utilities)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package contains the D-Bus daemon and related utilities.
 .
 The client-side library can be found in the libdbus-1-3 package, as it is no
 longer contained in this package.
Homepage: http://dbus.freedesktop.org/

Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 357
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.25.2-6
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libselinux1 (>= 1.32)
Pre-Depends: multiarch-support
Description: device mounting library
 The device mounting library, used by mount and umount helpers.

Package: libkeyutils1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 55
Maintainer: Christian Kastner <debian@kvr.at>
Architecture: amd64
Multi-Arch: same
Source: keyutils (1.5.9-5)
Version: 1.5.9-5+b1
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: http://people.redhat.com/~dhowells/keyutils/

Package: libreadline5
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 357
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Multi-Arch: same
Source: readline5
Version: 5.2+dfsg-2
Depends: readline-common, libc6 (>= 2.3), libtinfo5
Pre-Depends: multiarch-support
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: bsdmainutils
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 571
Maintainer: Debian Bsdmainutils Team <pkg-bsdmainutils@teams.debian.net>
Architecture: amd64
Multi-Arch: foreign
Version: 9.0.6
Depends: libc6 (>= 2.14), libncurses5 (>= 5.5-5~), libtinfo5, bsdutils (>= 3.0-0), debianutils (>= 1.8)
Suggests: cpp, wamerican | wordlist, whois, vacation
Breaks: bsdutils (<< 1:2.13-11)
Conffiles:
 /etc/calendar/default f499e79b0d2d685aa5ae7e1013940b96
 /etc/cron.daily/bsdmainutils 559387f792462a62e3efb1d573e38d11
 /etc/default/bsdmainutils bded239f4fea461cc5c92c3bd5a28cc9
Description: collection of more utilities from FreeBSD
 This package contains lots of small programs many people expect to find when
 they use a BSD-style Unix system.
 .
 It provides banner (as printerbanner), calendar, col, colcrt, colrm, column,
 from (as bsd-from), hexdump (or hd), look, lorder, ncal (or cal), ul, and
 write (as bsd-write).
 .
 This package used to contain whois and vacation, which are now distributed in
 their own packages. Also here was tsort, which is now in the "coreutils"
 package.

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2758
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Source: shadow
Version: 1:4.2-3+deb8u1
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules (>= 1.1.8-1)
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs c8e7f89a2c5665cf75a760d4341ce2d2
 /etc/pam.d/login 8cc9269fe679cb725d55925e95914499
 /etc/pam.d/su ce6dcfda3b190a27a455bb38a45ff34a
 /etc/securetty d9e5bf5e6bfa00ddd273a3bcf1a49bec
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: http://pkg-shadow.alioth.debian.org/

Package: bc
Status: install ok installed
Priority: standard
Section: math
Installed-Size: 255
Maintainer: Ryan Kavanagh <rak@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 1.06.95-9
Depends: libc6 (>= 2.14), libreadline6 (>= 6.0), libtinfo5
Description: GNU bc arbitrary precision calculator language
 GNU bc is an interactive algebraic language with arbitrary precision which
 follows the POSIX 1003.2 draft standard, with several extensions including
 multi-character variable names, an `else' statement and full Boolean
 expressions.  GNU bc does not require the separate GNU dc program.
Homepage: http://ftp.gnu.org/gnu/bc/

Package: jupp
Status: install ok installed
Priority: optional
Section: editors
Installed-Size: 630
Maintainer: Debian QA Group <packages@qa.debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.1.28-1
Provides: editor
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32), libtinfo5
Breaks: joe (<< 3.7-2.3~)
Conffiles:
 /etc/jupp/charmaps/klingon e760f34e0bd3ceeb2221a7665c7eb7e8
 /etc/jupp/jupprc 021fe77e3feb8ce823f0fc983037b138
 /etc/jupp/syntax/asm.jsf f92a20999ed748642c8c7345a9319a48
 /etc/jupp/syntax/c.jsf b8b2e30514353d3f31bda0a9a9ec527f
 /etc/jupp/syntax/conf.jsf 70b0f5a48cdbafa85d965d8cad293ab7
 /etc/jupp/syntax/csh.jsf bdfdf136a6e521bf3df331cf1070b0f8
 /etc/jupp/syntax/diff.jsf 97578a159e8fa08375dcd99f985b1856
 /etc/jupp/syntax/fortran.jsf 78be9a224a971c05dce5c95749e4134c
 /etc/jupp/syntax/html.jsf 952c619d9db3307562310656a6f32b68
 /etc/jupp/syntax/java.jsf 6f332f26a3ab8cc3f73ba32826673e06
 /etc/jupp/syntax/lisp.jsf ff20d0307931ca775d444016da0c5161
 /etc/jupp/syntax/mail.jsf e162257089971e742157b02996a7cddc
 /etc/jupp/syntax/mason.jsf 710f29f96efcb1d3caf7c547e9048336
 /etc/jupp/syntax/pascal.jsf 4f3bb03277c67b8a68165a438c15f2a2
 /etc/jupp/syntax/perl.jsf d5d4aac001eec7c59b052197eeace970
 /etc/jupp/syntax/php.jsf c73529faa2d9a84d2136f5849da33ed6
 /etc/jupp/syntax/python.jsf af31e4fa508f57ce94d24bd7030c0482
 /etc/jupp/syntax/sh.jsf 4a2c2784f8cde3c28f266c791885dadc
 /etc/jupp/syntax/tcl.jsf 55bbc12c794f06f5ace96d87bada7187
 /etc/jupp/syntax/verilog.jsf 85f8f519aa3bbb1964a015f98ed15977
 /etc/jupp/syntax/vhdl.jsf 0e3a676eca535a1d8cd3fa79c8291bad
 /etc/jupp/syntax/xml.jsf 738b7cd82f300cefa8e03ed3fd264aa2
Description: user friendly full screen text editor
 Joe, the Joe's Own Editor, has the feel of most PC text editors: the key
 sequences are reminiscent of WordStar and Turbo C editors, but the feature
 set is much larger than of those.  Joe has all of the features a Unix
 user should expect: full use of termcap/terminfo, complete VI-style Unix
 integration, a powerful configuration file, and regular expression search
 system.  It also has eight help reference cards which are always available,
 and an intuitive, simple, and well thought-out user interface.
 .
 Joe has a great screen update optimisation algorithm, multiple windows
 (through/between which you can scroll) and lacks the confusing notion of
 named buffers.  It has command history, TAB expansion in file selection
 menus, undo and redo functions, (un)indenting and paragraph formatting,
 filtering highlighted blocks through any external Unix command, editing
 a pipe into or out of a command, block move, copy, delete or filter, a
 bracketed paste mode automatically enabled on xterm-xfree86 and decimal
 and hexadecimal gotos for lines, columns, and file offsets.
 .
 Through simple QEdit-style configuration files, Joe can be set up to
 emulate editors such as Pico and Emacs, along with a complete imitation
 of WordStar, and a restricted mode version (lets you edit only the files
 specified on the command line).  Joe also has a deferred screen update to
 handle typeahead, and it ensures that deferral is not bypassed by tty
 buffering.  It's usable even at 2400 baud, and it will work on any
 kind of sane terminal.  Furthermore, it supports SELinux context copying
 on Debian systems with the Linux kernel.
 .
 This version of JOE only comes with the Jupp flavour, to not conflict
 with the Debian joe package, activated. The resource files and executable
 links and menu entries for the other flavours are still available, though,
 in the joe-jupp package.
Homepage: https://www.mirbsd.org/jupp.htm

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1066
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.113+nmu3
Replaces: manpages-it (<< 0.3.4-2), manpages-pl (<= 20051117-1)
Depends: perl-base (>= 5.6.0), passwd (>= 1:4.0.12), debconf | debconf-2.0
Suggests: liblocale-gettext-perl, perl-modules
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/

Package: initscripts
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 165
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: libc6 (>= 2.4), mount (>= 2.11x-1), debianutils (>= 4), lsb-base (>= 3.2-14), sysvinit-utils (>= 2.88dsf-50), sysv-rc | file-rc, coreutils (>= 5.93)
Recommends: psmisc, e2fsprogs
Breaks: aide (<< 0.15.1-5), atm-tools (<< 1:2.5.1-1.3), autofs (<< 5.0.0), bootchart (<< 0.10~svn407-4), console-common (<< 0.7.86), console-setup (<< 1.74), cruft (<< 0.9.16), eepc-acpi-scripts (<< 1.1.12), fcheck (<< 2.7.59-16), hostapd (<< 1:0.7.3-3), hurd (<< 0.5.git20131101~), ifupdown (<< 0.7.46), initramfs-tools (<< 0.104), libpam-mount (<< 2.13-1), live-build (<< 3.0~a26-1), ltsp-client-core (<< 5.2.16-1), mdadm (<< 3.2.2-1), nbd-client (<< 1:2.9.23-1), nfs-common (<< 1:1.2.5-3), portmap (<< 6.0.0-2), readahead-fedora (<< 2:1.5.6-3), resolvconf (<< 1.49), rpcbind (<< 0.2.0-7), rsyslog (<< 5.8.2-2), selinux-policy-default (<= 2:0.2.20100524-9), splashy (<< 0.3.13-5.1+b1), sysklogd (<< 1.5-6.2), util-linux (<< 2.20.1-5), wpasupplicant (<< 0.7.3-4), xymon (<< 4.3.0~beta2.dfsg-9)
Conflicts: libdevmapper1.02.1 (<< 2:1.02.24-1)
Conffiles:
 /etc/init.d/bootlogs 41ad826ad3091964c994b03177bbc29b
 /etc/init.d/bootmisc.sh 7e77260cb4071c21a99d581bfb8d2b74
 /etc/init.d/checkfs.sh 8cd37d9296845ce642e5671198469c32
 /etc/init.d/checkroot.sh 9c6f18f6f6b09ce96175bbbc5aaa8c99
 /etc/init.d/checkroot-bootclean.sh 955dcf4da7378f9f981d3f04c94d36d7
 /etc/init.d/halt a0e668699f774d928ddc62954155adb5
 /etc/init.d/hostname.sh 2180072dbb4e2f42f7ad4df4a2f9888d
 /etc/init.d/killprocs 9866a64a5d3d34552b0c36f5667cdacd
 /etc/init.d/motd dbc3f882af04254005bb96e4f780e5a0
 /etc/init.d/mountall.sh 7dc50e51261550184c078955c01b5628
 /etc/init.d/mountall-bootclean.sh 4c6b07a64798d8d78783e271238511f4
 /etc/init.d/mountnfs.sh a33d7b1a4d5043ea997af1f44c600cb9
 /etc/init.d/mountnfs-bootclean.sh 68aeda71fd9ae6861c3859c4ac33ee62
 /etc/init.d/mountdevsubfs.sh c18f4495f67dec33e257946215f54508
 /etc/init.d/mountkernfs.sh 12a99beb128e18bb6b277882233545af
 /etc/init.d/rc.local 7d505630f083ddc543cb68fbeb83a6b5
 /etc/init.d/reboot 39ce57bc053ad1bf9861347927d7db6b
 /etc/init.d/rmnologin eb11c47dd70b51a6e0d927f50490965e
 /etc/init.d/sendsigs 617e0ce4756cd2ac0c53634c4667fe22
 /etc/init.d/single bc7e38f0849ebfe767d162861fae002c
 /etc/init.d/umountfs 49f742a0f5af8124caba6c4264e78aa6
 /etc/init.d/umountnfs.sh 5137d5524cdba56d07e61c1cd5bb7238
 /etc/init.d/umountroot 57c8e9e95211ab355591dc8c211c8e8f
 /etc/init.d/urandom e6454386bfce38efb5987dd06cb3b21d
 /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
 /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a
 /etc/default/rcS a4af750cc5d1edc264d47dc01d11e1b8
 /etc/default/tmpfs 9af2949a1c0373adfa0c7db2453eee62
 /etc/network/if-up.d/mountnfs 528b2efd88285d2f443fcf54234b5156
Description: scripts for initializing and shutting down the system
 The scripts in this package initialize a standard Debian
 system at boot time and shut it down at halt or reboot time.
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 80
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: acl
Version: 2.2.52-2
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14)
Pre-Depends: multiarch-support
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 535
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: ncurses (5.9+20140913-1)
Version: 5.9+20140913-1+b1
Pre-Depends: libc6 (>= 2.14), libtinfo5 (>= 5.9+20130119)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: http://invisible-island.net/ncurses/

Package: acl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 258
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.2.52-2
Depends: libacl1 (= 2.2.52-2), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14)
Description: Access control list utilities
 This package contains the getfacl and setfacl utilities needed for
 manipulating access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/

Package: libslang2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1543
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: amd64
Multi-Arch: same
Source: slang2
Version: 2.3.0-2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Recommends: libpng12-0
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Built-Using: unicode-data (= 7.0-2)
Homepage: http://www.jedsoft.org/slang/

Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 339
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 2.3-2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: http://userspace.selinuxproject.org/

Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 369
Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: dbus
Version: 1.8.22-0+deb8u1
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Recommends: dbus
Breaks: kde-window-manager (<< 4:4.4.5-9), kdebase-workspace-bin (<< 4:4.4.5-9)
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/

Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 129
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-4.9 (4.9.2-10)
Version: 1:4.9.2-10
Depends: gcc-4.9-base (= 4.9.2-10), libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/

Package: f2fs-tools
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 175
Maintainer: Filesystems Group <filesystems-devel@lists.alioth.debian.org>
Architecture: amd64
Version: 1.7.0-1.1~bpo8+1
Depends: libf2fs0 (= 1.7.0-1.1~bpo8+1), libc6 (>= 2.14), libselinux1 (>= 2.0.65), libuuid1 (>= 2.16)
Description: Tools for Flash-Friendly File System
 F2FS is a new filesystem for Linux aimed at NAND flash memory-based storage
 devices, such as SSD, eMMC, and SD cards. It is based on Log-structured File
 System (LFS).
Homepage: http://git.kernel.org/cgit/linux/kernel/git/jaegeuk/f2fs-tools.git

Package: libreadline6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 419
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: same
Source: readline6 (6.3-8)
Version: 6.3-8+b3
Depends: readline-common, libc6 (>= 2.15), libtinfo5
Pre-Depends: multiarch-support
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2733
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.25.2-6
Replaces: bash-completion (<< 1:2.1-3)
Depends: initscripts, lsb-base (>= 3.0-6), tzdata (>= 2006c-2)
Pre-Depends: libblkid1 (>= 2.25), libc6 (>= 2.15), libmount1 (>= 2.25), libncurses5 (>= 5.5-5~), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libslang2 (>= 2.2.4), libsmartcols1 (>= 2.25), libtinfo5, libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd | console-tools, util-linux-locales
Breaks: bash-completion (<< 1:2.1-3), grml-debootstrap (<< 0.68)
Conffiles:
 /etc/default/hwclock 3916544450533eca69131f894db0ca12
 /etc/init.d/hwclock.sh b5ca46c0c11ace2a1e40217c29646bf2
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
Description: Miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system.  Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.

Package: libustr-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 287
Maintainer: Vaclav Ovsik <vaclav.ovsik@i.cz>
Architecture: amd64
Multi-Arch: same
Source: ustr (1.0.4-3)
Version: 1.0.4-3+b2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Micro string library: shared library
 ustr (Micro string library) is a string API for C. It has tiny overhead over
 just plain strdup(), is much safer, is easier to use, is faster for many
 operations, can be used with read-only or automatically allocated data. You
 don't even need to link to the library to use it (so there are no
 dependencies).
 .
 This package contains the shared library for ustr.
Homepage: http://www.and.org/ustr/

Package: liblzo2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 149
Maintainer: Peter Eisentraut <petere@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lzo2
Version: 2.08-1.2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: data compression library
 LZO is a portable, lossless data compression library.
 It offers pretty fast compression and very fast decompression.
 Decompression requires no memory.  In addition there are slower
 compression levels achieving a quite competitive compression ratio
 while still decompressing at this very high speed.
Homepage: http://www.oberhumer.com/opensource/lzo/

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 575
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Version: 4.2.2-4+deb8u1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Description: The GNU sed stream editor
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: http://www.gnu.org/software/sed/

Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 209
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.25.2-6
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Description: smart column output alignment library
 The smart column output alignment library, used by fdisk utilities.

Package: libcryptsetup4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 227
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cryptsetup
Version: 2:1.6.6-5
Depends: libc6 (>= 2.17), libdevmapper1.02.1 (>= 2:1.02.90), libgcrypt20 (>= 1.6.1), libuuid1 (>= 2.16), libgpg-error0 (>= 1.10-0.1)
Description: disk encryption support - shared library
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides the libcryptsetup shared library.
Homepage: http://code.google.com/p/cryptsetup/

